NSK Primado2 Manuel D'utilisation page 46

6 – 2 – 1 Primado Wire Pin Driver Attachment (PD-DA-W/P)
_ Mounting
1 Insert the wire (or pin) Ⓑ through the tip of the Attachment
straight without twisting, while the Attachment Lever Ⓐ is
released.
Ⓑ
2 Adjust the length of the wire (or pin) Ⓑ as required and pull the
Attachment Lever Ⓐ. The wire (or pin) will be set in place.
Ⓑ
_ Removing
Perform steps 1 and 2 of the mounting procedure in the reverse order.
Ⓐ
Ⓐ
3 After mounting the wire (or pin) Ⓑ, pull it lightly to confirm that
it is securely connected to the Attachment.
Ⓑ
45
Operation of WPD Series