Controls And Features - Panasonic BT-H1700P Manuel D'instructions

CONTROLS AND FEATURES

FRONT VIEW
<Front Panel>
UNDER PULSE COLOR
DEGAUSS SCAN CROSS OFF
MENU BLUE ASPECT AREA
VOLUME
CHECK MARKER
2 3
1 Tally lamp
Lights when the tally control signal is ON. The tally control
signal is input through the MAKE remote terminal. For
details, refer to Page 17.
PHASE adjustment knob
2
Adjusts picture hue. Turn the knob to the left to make the
picture redder, and turn it to the right to make the picture
greener.
3 CHROMA adjustment knob
Adjusts picture colour density. Turn the knob to the left to
make the picture colour lighter, and turn it to the right to
make the picture colour deeper.
BRIGHT adjustment knob
4
Adjusts picture brightness. Turn the knob to the left to
make the picture darker, and turn it to the right to make
the picture brighter.
CONTRAST adjustment knob
5
Adjusts picture contrast. Turn the knob to the left to make
the picture contrast lower, and turn it to the right to make
the picture contrast higher.
6 VOLUME buttons
Adjusts the speaker volume. Also used to set or adjust
menu screen items.
Menu select buttons
7
Selects menu screen items or set-up menu screen.
4
1
SLOT 1 SLOT 2 SLOT 3 POWER
A B C D E F
INPUT SELECT
4 5 6 7
VOLUME
9 10 11 12 16 17 18 19 20 21 22 23
UNDER PULSE COLOR
DEGAUSS SCAN CROSS OFF
SLOT 1
A B
MENU SCREENS ASPECT AREA
CHECK MARKER
13 14 15
8
8 MENU button
Displays, adjusts or closes a menu screen.
DEGAUSS button/lamp
9
Press the DEGAUSS button. The button lights and
degaussing is performed automatically. When the
degaussing is completed, the light goes off.
10 UNDER SCAN button/lamp
Press the UNDER SCAN button. The button lights and
the screen is reduced (under-scan) and the whole screen
is displayed. When the UNDER SCAN button is pressed
while lit, the light goes off and the screen returns to
normal size (over-scan). Use this function to check the
whole screen.
NOTE: This function is invalid with the RGB-input screen.
PULSE CROSS button/lamp
11
Press the PULSE CROSS button. The picture is
separated into 4 parts. The synchronised signal displayed
in the shape of a cross separating the parts. The screen
automatically brightens to make it easier to confirm
synchronised sections easy. When the PULSE CROSS
button is pressed while lit, the light goes off and the
normal screen is restored.
NOTE: This function is invalid with the RGB-input screen.
POWER
SLOT 2 SLOT 3
C D E F
INPUT SELECT