Identifying Controls; Main Unit - Panasonic TH-43LFE8U Mode D'emploi

Identifying Controls

Main Unit

65-inch model
● For normal use, pull out the power indicator and
remote control sensor from the edge side of the
main unit by operating the lever on the rear panel.
Depending on the setup condition such as when
using the multi display, store them in the main unit.
Note
● For normal use, pull out the power indicator and
remote control sensor from the edge side of the
main unit by operating the lever on the rear panel.
Depending on the setup condition such as when
using the multi display, store them in the main unit.
1 Power Indicator / Remote control sensor
The Power Indicator will light.
When the power of the unit is ON (Main Power On /
Off switch: ON)
● Picture is displayed: Green
●
Power OFF (Standby) with remote control: Red
When [Network control] is set to [On] : Orange (Red/
Green)
● Power OFF with "Power management" function:
Orange (Red/Green)
When the power of the unit is OFF (Main Power On
Off switch: OFF): No light
Note
The unit will still consume some power as long as the
power cord is still inserted into the wall outlet.
When the power indicator is orange, power consumption
during standby is generally larger than that of when the
power indicator is red.
14
English
43/48/55-inch
models
+
INPUT MENU
1 External Input Terminal
● Connect to video equipment, PC, etc. (see page
13)
2 <Main Power On / Off switch>
● Turns the power On / Off.
3 <INPUT (Unit)> (INPUT signal selection)
●
Selects the connected device.
4 <MENU (Unit)>
●
Each time the <MENU (Unit)> button is pressed,
the menu screen will switch.
5 <+ (Unit)> / <- (Unit)>
● Volume Up "+" Down "–"
● Adjusts the volume. Also, switches the settings or
adjusts the level on the main screen.
6 < ▲ (Unit)> / < ▼ (Unit)>
●
Selects the setting item.
7 <ENTER (Unit)>
●
Configures the item on menu screen.
●
Switches aspect mode.
-
ENTER