Foppapedretti TUO Notice D'utilisation page 347

The "BASE AUTO CON STAFFA mod CS28B " is a "SEMI-UNIVERSAL" product destined
for use with the car seat "TUO CS28", "MYO CS28", "MYO TRONIC CS28", (approved to
ECE R44-04 5066 ).
The "BASE AUTO CON STAFFA mod CS28B"can only be installed on seats in
vehicles indicated on this list. Please note that this list undergoes ongoing revision
procedures, with changes and additions of vehicles accordingly. The up to date list
can be consulted on our web site: www.foppapedretti.it
The "BASE AUTO CON STAFFA mod CS28B" can be fastened to the seat using the 3-
point safety harness together with the support foot.
Consult the instruction car seat group 0+ (type CS28) and base 0+ instruction manual
for information on how to install and secure the base 0+ correctly, how to fasten the
car seat to the base, how to position and fasten baby in the infant car seat and how
to regulate the handle of the infant car seat correctly.
This base must only be placed in a forward facing position on a car seat provided,
1-2-3-4-5-6-7, with a 3 point safety belt according to regulation ECE R16 or an
equivalent standard.
READ THE WARNINGS ON THE PRODUCTS CAREFULLY AND THE INSTRUCTION
MANUAL AND KEEP FOR FUTURE REFERENCE.
IMPORTANT
The base 0+ is standard approved according to the regulation ECE R44/04, the
European regulation concerning the safety of infant car seats and it must only be
used together with the infant car seat Group 0+ (type CS28/ECE R44-04 5066).The
model of the infant car seat is stated on the label fitted on the product.
If your car has storage compartments on the floor of the vehicle, in the area where
the support leg is to rest, you should open the compartment and rest the leg on the
bottom of it.
All manuals and user guides at all-guides.com
WARNING: DO NOT USE THIS INFANT CAR
SEAT ON SEATS EQUIPPED WITH AIRBAGS
CS28B Car list

GB