Unpacking And Assembly - Oregon ST600 Mode D'emploi

Multi-accessoire
Masquer les pouces Voir aussi pour ST600:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Unpacking and Assembly

Unpacking
WHAT'S IN THE BOX?
The string trimmer requires some assembly before
use These items ship with the string trimmer:
• String trimmer attachment
• Guard with attachment screws
• Attachment tab
• Original Instruction Manual
• Torx wrench
• Blocking pin
After removing the string trimmer from the box,
inspect it carefully to ensure no damage has
occurred during shipping and that no parts are
missing If any parts are damaged or missing,
do not use the string trimmer Contact Oregon®
Cordless Tool System at 888 313 8665 to obtain
replacement parts or contact your local dealer
ST600 Multi-attachment
Unpacking and Assembly
Assembly
WARNING: A battery operated tool
with the battery pack inserted can start
accidentally. Remove the battery pack before
assembling or performing maintenance.
ATTACHING THE GUARD (FIG. A)
WARNING: The line cut-off blade on the
grass deflector is sharp. Avoid contact with
the blade. Failure to avoid contact can result
in serious personal injury.
• Remove the battery pack
• Remove the screws (1) from the guard (2)
• Insert the attachment tab (3) on the mounting
bracket in the slot on the guard
• Tighten the screws securely
INSTALLING AN ATTACHMENT TO
THE POWERHEAD (FIG. B)
WARNING: Read and understand entire
Original Instruction Manual for each optional
attachment used on this powerhead and
follow all warnings and instructions. Failure
to follow all instructions could result in
electric shock, fire, and/or serious personal
injury.
WARNING: This powerhead is designed
to be used only with the Oregon attachment
models that are specified in this Original
Instruction Manual. Use of other attachments
could cause serious personal injuries or
property damage.
This powerhead may be used with only Oregon
Multi-attachments
11

Publicité

Table des Matières
loading

Table des Matières