Publicité
7
Adjustment Step
a
1
6 of 8
Important! You will need to adjust this product after installation is complete.
Make sure all your equipment is properly installed on the product before
attempting adjustments. This product should move smoothly and easily
through the full range of motion and stay where you set it. If movements are
too easy or diffi cult or if product does not stay in desired positions, follow the
adjustment instructions to create smooth and easy movements. Depending on
your product and the adjustment, it may take many turns to notice a diff erence.
Any time equipment is added or removed from this product, resulting in a
change in the weight of the mounted load, you should repeat these adjustment
steps to ensure safe and optimum operation.
Increase Lift Strength
If the mounted weight is too heavy or this product does not stay up
when raised, then you'll need to increase Lift Strength:
Decrease Lift Strength
If the mounted weight is too light or this product does not stay
down when lowered, then you'll need to decrease Lift Strength:
2
5mm
888-45-300-G-00 rev. B • 04/13
Publicité
