Maintenance - Wolf Garten LI-ION POWER GTA 700 Notice D'instruction D'origine

Start
K
Turning on
1. Press and hold the unlock button
2. Press the power ON/OFF button
3. Release the unlock button
Turning off
1
Attention! Rotating string!
Tool is still running!
z Release the ON/OFF button

Maintenance

Replacing the cord spool
1
Attention! Rotating string!
Tool is still running!
z Always remove battery before perfor-
ming any work on the trimmer!
1. Press both locking tabs of spool cover simulta-
neously and remove
2. Remove cord spool
3. Clean, if necessary
4. Insert cord spool into housing
5. Thread the end of the wire through the eye of
N
the wire box
3
To avoid inadvertent unwinding, do not
take wire on the new spool out through
the support holes before
N
inserting
6. Place the spool cover on the cord spool holder
so that the two locking tabs lock into place.
1
Before switching on: Hold trimmer paral-
lel to the ground; otherwise, there is dan-
ger of injury.
16
.
.
.
.
M N
M
.
N
.
.
.
3
Tips on trimming
z Cut high grass slowly, step by step.
z You can prolong the life of your trimmer
by removing grass from the ventilation
slots and the bottom of the trimmer be-
fore or after each use.
z In order to take full advantage of the bat-
tery capacity, you should not switch the
trimmer on and off unnecessarily.
G