Maintenance; Faults And How To Remedy; Spare Parts; Warranty - Wolf Garten GT 840 Notice D'instruction D'origine

Maintenance

Replacing the cord spool
1
The trimmer continues to spin after
being switched off! Always disconnect
from the power supply before perform-
ing any work on the trimmer!
1. Press both locking tabs of spool cover simulta-
neously and remove
2. Remove cord spool
3. Clean, if necessary
4. In order to prevent accidental unwinding, do
not remove the cord ends of the new cord
spool from the slits before inserting the spool
P

Faults and how to remedy

Problem Ursache
• Spool is empty.
• Dirt and debris in spool drive mechanism. • Clean parts with a brush.
Automatic
line feed
• Line is torn and stuck inside spool.
mecha-
nism is not
• Line is „welded" to itself or to spool
working.
through heat build-up.
When in doubt, always consult a WOLF service workshop.

Spare parts

Ordering Number
7130 085
7136 085
7136 086
Supplied by your dealer

Warranty

The warranty rules issued by our company or the
importer apply to every country. As part of the war-
ranty, we remedy malfunctions on your appliance
free of charge provided that this malfunction is
16
O
Designation of the item
GT-F7
GT-F8
GT-R
5. Insert cord spool into housing
3
The bumps on the cord spool must face
the cover!
6. Place the spool cover on the cord spool holder
so that the two locking tabs lock into place.
1
Before switching on: Hold trimmer paral-
lel to the ground; otherwise, there is dan-
ger of injury.
Abhilfe
• Fit new spool.
• Remove spool, check tightness of winding
and replace spool in the usual way.
• Remove welded line section, check tight-
ness of winding and replace spool in the
usual way.
Description of the item
Cord spool
Cord spool
Wheels
caused by a material or manufacturing defect. In
the event of a warranty claim, please turn to your
dealer or the nearest branch office.
Q
.
G