Sagola 4600 Xtreme Manuel D'utilisation page 32

6.2.- Tips for application in different climatic zones
Paint application, especially waterbone paints.
Temperature
50
40
30
20
10
•Extreme climate conditions: The use of additives in the paint may be requi-
red (see paint manufacturer specifications).
•Recommendations:
- Increase the peak size from 0.1 to 0.2 mm. compared to the one used in
normal conditions.
Extreme climate
- Reduce the size of the fan by making it more rounded and with a central
fan pattern
core more loaded with product.
•Critical climate conditions: The use of additives in the paint may be requi-
red (see paint manufacturer specifications). Reduction of the fan and increa-
se of the spray core in a critical climate.
•Recommendations:
- Reduce the dynamic pressure between 0.2 and 0.5 bar compared to that
used in normal conditions.
- Increase the size of the peak from 0.1 to 0.2 compared to that used in
Critical climate
normal conditions.
fan pattern
- Increase the product load in the central core of the fan.
•Non-critical climate conditions: The use of additives in the paint may be
required (see paint manufacturer specifications).
•Recommendations: Standard fan pattern.
•Optimum climate conditions:
Standard Optimum
•Recommendations: Optimum fan pattern.
fan fan
pattern pattern
( o C)
Do not apply paint in these conditions
10 20 30 40 50
ENGLISH
60 70 80 90 100
RH (%)