Fein MShyo869-1d Mode D'emploi page 12

en
12
Original Instructions.
Symbols, abbreviations and terms used.
The symbols in the Instruction Manual and on the power
tool shall aide in directing your attention to possible haz-
ardous situations when working with this power tool.
Symbol
WARNING
B
Ø
H
Ø
D
T
U
Explanation
Action to be taken by the user
General prohibition sign. This action is forbidden!
Do not touch the rotating grinding wheels.
Observe the instructions in the text or graphic opposite!
Make sure to read the enclosed documents such as the Instruction Manual and the General
Safety Instructions.
For a better understanding, unfold the fold-out page at the beginning of this Instruction Man-
ual.
Before commencing this working step, pull the mains plug out of the socket. Otherwise there
will be danger of injury if the power tool should start unintentionally.
Use eye-protection during operation.
Use ear protection during operation.
Use a dust mask during operation.
Use protective gloves during operation.
Observe the information in the adjacent text!
An exposed surface is very hot if touched and therefore dangerous.
Confirms the conformity of the power tool with the directives of the European Community.
This sign indicates a possible dangerous situation that could cause severe or fatal injury.
Worn out power tools and other electrotechnical and electrical products should be sorted
separately for environment-friendly recycling.
Product with basic insulation and exposed (touchable), conductive parts additionally con-
nected to the protective earth conductor.
Grinding accessory (DIN ISO 603, DIN EN 12413) form 1 – Straight grinding wheel
Ø
= max. diameter of grinding wheel
D
Ø = Diameter of mounting hole
H
B = Thickness of the grinding wheel
Grinding accessory (DIN ISO 603, DIN EN 12413) form 4 – Double-sided conical grinding
wheel
Ø
= max. diameter of grinding wheel
D
Ø = Diameter of mounting hole
H
T/U = Thickness of the grinding wheel
It is mandatory for you to understand the symbols/infor-
mation and to act accordingly, in order for the power
tool to be implemented more efficiently and more safely.
The safety warnings, information and symbols do not
serve as a substitute for the measures to be taken accord-
ing to the regulations for the prevention of accidents.