Publicité
1 Safety instructions
•
Before using, please carefully read this manual, in strict accordance with the instructions and precautions. Make a better
protection for both machine and operator.
•
There are WARNING labels printed on the top of machine. Please strictly control the working environment to meet the
requirements when using . Otherwise, it may damage the machine or more seriously may endanger personal safety.
•
Owing to the high temperature, please keep away from human body when heating. Also keep children away from the
machine. Please note to the earthing and avoid electric shock. Pay attention to water-proof and moisture-proof also
ventilation.
•
Power supply voltage as well as wire size should in strict accordance with the nameplate. All cables should be placed
neatly. After using, not only to turn off the machine switch, but also to unplug the socket for insurance purposes. Do not
open the cover with electricity charged for maintenance, please contact our professional before opening.
•
Pay attention to below when using:
Make sure the machine is in good condition before using. Properly connected to the power to ensure that the machine
is running normally. It is best to place the machine on a flat surface. Adjust the parameter according to the thickness of
material. Please lift the heated end 2-5 mm above the metal plate when it working, in order to prevent from burnt out. This
machine only suitable for iron plate and soft dents. Whereas, sharp dents as well as creased areas belong to unsuitable
range of use.
2 Specifications
Model
Input voltage
Rated power
Rated input current
Frequency
Efficiency
Power factor
Insulation grade
Dimensions
Weight
3 Working instructions
•
Firstly move and heat around the dented area then toward to the dent center.
•
Do not keep heating one area. If you want to reach an ideal effect, you'd better accompany by the levelling lamp when
operating.
•
It is suggested that the operators should practice time after time to master skilled operation way.
IDH110
230 V
1100 W
6 A
50/60 Hz
> 90%
> 0.95
F
260 x 170 x 200 mm
3 kg
6
M1.1.IDH110.NLFREN 20082018
EN
Publicité
