Connecting To Devices Which Control The Projector - JVC D-ILA DLA-QX1G Manuel D'instructions

Connecting to Various Devices (Cont.)

Connecting to Devices which Control the Projector

When you install a computer to the projector, you can operate the projector using the computer.
Before connection, be sure to turn off both the projector and computer.
• Read the manual thoroughly which comes with each device to be connected.
• Prepare and use the separately available RS-232C connection cable.
• When another DLA-QX1G is connected to this projector using RS-232C OUT terminal, you can enable a computer to control
plural DLA-QX1Gs at the same time.
For details, consult your dealer.
30
CONTROL
REMOTE RS-232C OUT
RS-232C connection cable
(not supplied)
RS-232C IN