Appliance Description; Start-Up; Usage; Cleaning And Maintenance - Sanitas SMG 16 Mode D'emploi

Masquer les pouces Voir aussi pour SMG 16:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 14
Handling
CAUTION
Switch the device off and disconnect the power supply after every use and before every cleaning.
• Make sure that all moving parts can move freely at all times.
• Make sure that no hair can get caught in the device.
• Avoid contact with sharp or pointed objects.
• Do not kink the cable.
• Make sure that the device is not too close to heat sources such as ovens, radiators or direct
sunlight.

5. Appliance description

6. Start-up

• Check the device, power supply and cables for damage.
• Connect the device to the mains power supply. The device must be switched off.
• Route the cable safely so that there is no risk of anyone tripping over it.

7. Usage

Switch the device on by moving the switch to the desired massage setting "M" or "M+H".
Guide the device with both hands to the area of the body to be massaged. You can stand, sit or lie down
and can massage yourself or another person. The massage intensity can be altered by pressing more or
less firmly with the massage device. Do not massage a certain site of the body for longer than 3 minutes
and then change to other area of the body.
You can massage with or without the massage attachment. Simply choose the massage attachment
that you prefer. With M+H intrared heat treatment, any massage attachments will prevent the heat sup-
ply of the infrared source. You should therefore only operate the device on ‚M' if a massage attachment
is fitted.
Note
Do not use the massage device just before going to bed. The massage can also have a stimulating
effect and may cause difficulties in getting off to sleep.
WARNING
• The massage must be pleasant and relaxing at all times. Stop the massage or change the position
of the massage device if you find it is painful or unpleasant.
• Do not jam or force any part of your body, in particular your fingers, into the area of the massage
head.

8. Cleaning and maintenance

Cleaning
First unplug the device and allow it to cool off. Then you can clean it with a cloth which is no more than
lightly moistened. You can also use a mild detergent.
1. On/off switch
1
O: Off
M: Vibration massage
2
M+H: Vibration massage with heat function
2. Infrared light
3. Interchangeable massage attachments
3
11

Publicité

Table des Matières
loading

Table des Matières