MRA 4025066171200 Instructions De Montage page 3

GB
Read this manual carefully and check the parts list for completeness before you begin. We recommend
Number
1 MRA windscreen
2 Distance sleeves 3mm
2 Distance sleeves 6mm
4 Plastic washers 12x5x0.5mm
4 O-ring, black, 4.5 x 1.5 mm
4 Head screws, M5x20mm
Mounting the windscreen onto the motorcycle:
1. Place the motorcycle on a flat surface.
2. Disassemble the original fairing screen.
3. Insert the supplied fillister head screws (M5 x 20mm) with the plastic washers
[10635] into the TOP holes on the MRA windscreen. Afterwards, place the 6mm
distance sleeves [11038] and the O-rings [10992] from the inside on the screws to
secure them (P1).
4. Afterwards, insert the supplied fillister head screws (M5 x 20mm) with the plastic
washers [10635] into the BOTTOM holes on the MRA windscreen. Afterwards,
place the 3mm distance sleeves [10872] and the O-rings [10992] from the inside
on the screws to secure them (P2).
5. Then, secure the MRA windscreen at the fillet of the motorcycle by centrally
aligning it on the motorcycle and tightening the screws.
After installation, check that all of the screws are tight; tighten them up if necessary. Repeat this at
regular intervals. Clean the screen with water, neutral soap and a sponge. Do not use solvents, alcohol or
MRA-Klement GmbH Siemensstr. 6 D-79331 Teningen Tel.: +49 7663 93890 E-Mail: info@mra.de
Thank you for buying a MRA Windshield.
that you have your screen fitted by an authorised workshop.
Article
spirits to clean the screen as they will damage it.
MO UN T IN G IN STR UC T ION S
Honda NC750X 2021-
Article No..
--- Allen key 3 and 5mm
10872
11038
10635
10992
10673
3
Required tools