Festo VMPA-ASI Serie Mode D'emploi page 30

VMPA-ASI-EPL-...-8E8A-Z/-CE
Diagnostics
– AS-Interface voltage and address,
watchdog, I/O status
– Additional power supply not applied
or undervoltage, peripherals error
1)
The inputs are short-circuit resistant. In the event of a short circuit
the slave will be switched off. The AS-Interface master then regards
this slave as absent. The slave reports back as functioning once the
short circuit has been eliminated.
Note
For use of VMPA-ASI-EPL-...-8E8A-CE at least the
AS-Interface Master Version M3 is required.
30
LED display
LED display
Festo VMPA-ASI-EPL-...-8E8A-Z/-CE 1104b English