Snap-On EEWH312A Instructions D'utilisation page 5

Risk of pinching or crushing hands and fi ngers when mounting and demounting.
· Read and understand the operation instructions before using this tire changer.
· Keep hands and fi ngers clear of rim edge during demounting and mounting
process.
· Keep hands and fi ngers clear of mount/demount head during opera tion.
· Keep hands and other body parts away from moving surfaces.
· Do not use tools other than those supplied with tire changer.
· Do not bypass any safety features.
· Use proper tire lubricant to prevent tire binding.
Contact with moving parts could cause injury.
Risk of eye injury. Flying debris, dirt, and fl uids may be discharged during bead
seating and infl ation process.
· Remove any debris from tire tread and wheel surfaces.
· Remove excess tire lubricant before infl ating.
· Wear approved safety glasses during mount and demount procedures.
Debris, dirt, and fl uids can cause serious eye injury.
Risk of injury. Tools may break or slip if improperly used or maintained.
· Read and understand the operation instructions before using this tire changer.
· Use only the mount/demount tire tool supplied with the tire changer.
· Frequently inspect, clean, and lubricate (if recommended) where designated.
· Follow procedures when instructed in this manual.
Tools that break or slip can cause injury.
Collision and dragging hazard:
· Do not rotate the turntable without a wheel.
· Do not approach the fl ange if it is moving.
· Pay attention to the claws when they project from the fl ange.
· Do not place projecting objects on the fl ange.
· Do not place projecting objects close to the fl ange.
Contact with moving parts can cause injuries.
Snap-On EEWH312A
EN - 5