Features - Snap-On EEWH312A Instructions D'utilisation

ROUND TURNTABLE PLATFORM - Provides easy
access to tires lower bead during the tire changing
process.
INTEGRATED BEAD SEATING JETS - Air infl ation jets
are integrated into the turntable clamping jaws to insure
full bead seating force directly into the tire cavity regard-
less of tire diameter.
TWIN CYLINDER CLAMPING POWER - Two 2.45"
clamping cylinders provide uniform clamping pressure
throughout the stroke (regardless of rim sizes) as well
as providing 25% more clamping power than most single
clamping cylinder tire changers. Additionally two smaller
cylinders reduce the critical turntable to cabinet distance,
reducing the stress on the transmission.
WHEEL CLAMPS
UNIQUE SIX POINT CONTACT CLAMPS
Provide better gripping capability regardless of dirt and
moisture.
REDUCED ANGLE CLAMPS
Increases clamping contact area with rim insuring no
slippage.
NYLON INSERT SOFT TOUCH CLAMPS
Single sided nylon insert in the clamping jaws provides
nonmetal touch in critical customer visible areas.
IN-COMING AIR PRESSURE GAUGE
Ergonomically located air gauge allows easy monitoring
of incoming air pressure.
INTEGRATED PRESSURE LIMITER
Integrated safety pressure limiter stops air fl ow once
tire pressure has reached approx. 55 PSI preventing
accidental tire over-infl ation.
MOUNT/DEMOUNT ARM ASSEMBLY
NON-SCRATCH NYLON INSERT - Integrated into the
mount/demount head is a replaceable scratch resistant
nylon insert protecting against accidental rim contact.
1.1.1

FEATURES

EEWH312A
SAFETY RESTRAINT ARM (Optional)
TIRE/RIM ASSEMBLY RESTRAINT - Safety Restraint
Arm positively restrains tire and rim assembly to the tire
machine during the infl ation process reducing potential
for injury caused by the unlikely event of catastrophic
tire or rim failure.
SIMPLE SWING ARM DESIGN - SRA arm easily swings
to the left when not in use allowing the technician to
quickly and safely perform the infl ation process without
disrupting the tire changing procedure.
GRAVITY LOCK - SRA lock mechanism operates
without any mechanical cam system eliminating the
possibility of system deterioration or misadjustment from
mechanical wear.
POSITIONING SAFETY INTERLOCK SWITCH - Inte-
grated switch insures that SRA arm is centered on the
tire/rim assembly before the infl ation process can begin.
ANTI-ROTATION LOCK - Prevents SRA from rotating
during infl ation process.
TIRE/RIM ASSEMBLY RESTRAINT - Gravity Lock,
Safety Interlock Switch - Anti-Rotation Lock - If equipped
with this option.
CONSTRUCTION DESIGNED FOR DURABILITY
RUST PROOF VALVES AND CYLINDERS - Critical
bead breaking cylinder is lined with rust-proof polyfi ber
liner for years of rust free operation. Non-lined cylinders
will pit causing bead breaker power loss.
LIFETIME LUBRICATED POLYMER VALVES - Critical
foot valves fabricated from glass/fi ber self lubricating
material providing years of maintenance free operation.
WATER SEPARATOR AND AUTOMATIC OILER -
Lubricates all air used for machine operation, does not
lubricate air used for tire infl ation, as do some competi-
tive models.
HIGH TORQUE 1HP MOTOR - Industrial strength high
torque turntable drive motor eliminates tire remount
stalling on low profi le high performance tires (UL/CSA
approved).
EN - 9