Machine Dimensions; Nomenclature; Accessories And Consumables; General Cautions - Snap-On EEWH312A Instructions D'utilisation

1.2

MACHINE DIMENSIONS

Dimensions:
W = min: 31" (790mm) / max 41" (1040mm)
D = min: 35" (890mm) / max 49" (1250mm)
H = min 59" (1498mm) / max 68" (1727mm)
1.3

NOMENCLATURE

Before installing and using the Snap-on EEWH312A
Tire Changer it is suggested that you become familiar
with the nomenclature of the machine's components.
1. Vertical slide
2. Swing arm
3. Swing Arm Adjustment knob
4. Lock lever
5. Mount/demount head
6. Tower or column
7. Turntable
8. Clamping Jaws with Bead Seating Jets
9. Bead breaker arm
10. Bead breaker blade
11. Bead breaker pads
12. Foot pedal controls
13. Infl ation gauge
14. Bead seater/infl ator pedal
15. Infl ation hose
16. Paste bucket
17. Mount/Demount Tool
2
1
7
14
12
17
Figure 2
Figure 1
3
6
4 15
5
8
9
10
11
1.4 ACCESSORIES AND
CONSUMABLES
A series of accessories are usually available for the
machine. All accessories are indicated on the website:
http://service.snapon-equipment.net/
After accessing the website, proceed as follows:
1
Fig. 1.4-1
· Select Accessory Plan (1).
· Select the reference brand in the fi eld Brands (2).
· Select the Type of product "Tyre changers" in the
fi eld Product lines (3).
· Open the fi eld Model (4) and select the specifi c
machine model among the ones in the list.
· Enter "SEARCH" (5) to display the list of available
accessories.
NOTE: Use the codes in the list for the purchase
orders.

1.5 GENERAL CAUTIONS

A. DURING THE USE AND MAINTENANCE OF THE
MACHINE IT IS MANDATORY TO COMPLY WITH
ALL LAWS AND REGULATIONS FOR ACCIDENT
PREVENTION.
B. THE ELECTRICAL POWER SOURCE MUST HAVE
A GROUND CABLE AND THE GROUND CABLE OF
THE MACHINE MUST BE CONNECTED TO THE
GROUND CABLE OF THE POWER SOURCE.
C. BEFORE ANY MAINTENANCE OR REPAIRS
ARE ACCOMPLISHED THE MACHINE MUST BE
DISCONNECTED FROM THE AIR AND ELECTRICAL
SUPPLY.
D. NEVER WEAR TIES, CHAINS OR OTHER
LOOSE ARTICLES WHEN USING, MAINTAINING
OR REPAIRING THE MACHINE. LONG HAIR IS
ALSO DANGEROUS AND SHOULD BE KEPT
UNDER A HAT. THE USER MUST WEAR PROPER
SAFETY ATTIRE - GLOVES, SAFETY SHOES AND
GLASSES.
EN - 10
2 3
4
5