Use
1. Rotate the glass bell and remove it (Fig. 1).
2. Connect the power adapter's power cord to the diffuser
under the base of the diffuser (Fig. 2).
3. Remove the cover positioned above the reservoir (Fig. 2).
4. Pour water and 5 to 10 drops of essential oil into the reservoir (Fig. 3).
DO NOT fill above the 100 ml ''Max'' mark.
DO NOT use boiling water or demineralised water.
NEVER fill when the unit is turned on.
5. Replace the lid and the glass bell on the base (Fig. 4).
DO NOT use the appliance without the glass bell.
6. Plug the power adapter into the AC outlet.
7. The ''Mist'' button activates the device and adjusts the diffusion
st
(Fig. 5). 1
nd
2
press intermittent diffusion (30 sec. ON / 30 sec. OFF), the indi-
cator light is discontinuous. To turn off the device, press and hold
the ''Mist'' button for about 3 seconds.
8. The ''Light'' button activates and adjusts the ambient lighting (Fig. 6).
1
st
press: activation of the automatic colour changing mode. Then
successive presses: manual selection of the colour and its intensity
(soft / bright) or turn off the light.
9. It is advisable to drain the water from the reservoir and keep the unit
dry when not in use.
18
press continuous diffusion, the indicator light is constant.
EN
A
located