Publicité
Les langues disponibles
Les langues disponibles
EN
DMX Linking
The Freedom Cyc can work with a DMX controller. Instructions for connecting and configuring this product for DMX
operation are in the User Manual. If you are not familiar with DMX, download the DMX Primer from www.chauvetdj.com.
Wireless Configuration
The Freedom Cyc can be operated in wireless D-Fi mode using the optional FlareCON Air controller. For more
information about configuring this product to transmit or receive in wireless D-Fi mode, download instructions for the
Freedom Cyc User Manual from the Chauvet website.
Starting Address
To ensure full access to all channels available in each DMX mode, the highest recommended DMX address is 503.
Master/Slave Connection
The Freedom Cyc works in Master/Slave mode using wireless D-Fi. Information about configuring the Freedom Cyc for
Master/Slave operation is in the User Manual, which is available from the Chauvet website.
You can wirelessly sync an unlimited amount of receivers to one transmitter. To ensure strong
signals, the units should be elevated 5 feet or higher off the ground, or remain in an unobstructed line
of sight of each other.
IRC-6 (Infrared Remote Control)
The Freedom Cyc can be operated with the CHAUVET IRC-6.
<BLACK OUT>
BLACK
AUTO
SOUND
OUT
SENSI-
STROBE
SPEED
TIVITY
%
MANUAL
FADE
R
G
B
<STROBE>
A
UV
W
-
+
0
1
2
3
4
5
6
7
8
9
Number buttons
The fixture will retain settings if there is no operation within 2 seconds.
5
QUICK REFERENCE GUIDE
Button
Function
Black out
Automatic mode
<AUTO>
(press button + / - to select the program)
Auto speed
<SPEED>
(press button + / - to increase or decrease speed of the
program)
Strobe mode
(press button + / - to increase or decrease the strobe rate)
Dimmer
<%>
(press button + / - to increase or decrease output level)
<R>
Red
<G>
Green
<B>
Blue
<W>
White
Press the number buttons to bring up a specific preset color
Freedom Cyc QRG Rev. 3
Publicité
