Bühler technologies AHF-22 Notice De Montage page 9

AHF-22
5.2.4 Description of menu functions
5.2.4.1 Main menu
Regulator (probe)
From here you will be able to access all relevant
temperature controller settings. The related
submenu allows you to select the target tem-
perature and alarm thresholds.
Globale settings (ToP Settings)
Selection of the global temperature unit, either
degree Celsius (C) or degree Fahrenheit (F).
Note: This menu item has no sub-item. The temperat-
ure unit is directly selected.
Exit main menu
Display → E
Selecting this will return you to display mode.
5.2.4.2 Submenu
Regulator -> Target temperature (Temperature)
This setting is for the device temperature target
value. The value can be set within a range from
50 °C (122 °F) to 200 °C (392 °F).
Note: The default value on delivery is 180 °C (356 °F).
Controller -> Alarm range
This item allows setting of the alarm range
threshold for the optical alarm as well as for the
alarm relay. The alarm threshold may be set in
the range from ±5 °C (±9 °F) to ±30 °C (±54 °F)
with respect to the nominal value.
Note: Default value at delivery is ±10 °C (±18 °F).
Exit submenu
Display → Submenu → E
Selecting this will return you to the main menu.
6 Service and Repair
Please refer to the original operator's manual on the included
CD or online at www.buehler-technologies.com for a detailed
description of the unit including information on
troubleshooting and repair.
BX410006 ◦ 06/2019
7 Maintenance
Always observe the applicable safety- and operating regula-
tions when performing any type of maintenance. Please refer
to the original operator's manual on the included CD or online
at www.buehler-technologies.com for maintenance informa-
tion.
Bühler Technologies GmbH 9