Mercatus WonderXCart 092 Notice D'utilisation page 11

User's Manual
Manal de Instruções
Manual de Instrucciones
11. WonderXCart Operability
It is the operator's responsibility to determine and validate the suitability of the equipment for use in system or process. No warranty or
representation is made by the manufacturer with respect to suitability or performance of this equipment or to the results that may be
expected from its use.
360º motion sensors may not detect movement in rooms with dimensions over 50m
equipment be permitted to operate with humans or animals present.
Indications
11.1.
Fore a maximum efficiency follow the indications bellow:
 Mercatus ingenious health tech WonderXCart is intended for indoor use. Should only be used in a clean dry location with
temperatures ranges between 4 °C to 35 °C;
 Under no circumstances should WonderXCart be permitted to operate with humans or animals present in the area to be disinfected;
 For maximum efficiency the WonderXCart should be located as centrally as possible, away from room corners and is most effective
if the ultraviolet rays are unobstructed;
 Disinfected procedures do not dismiss the need for cleaning procedures. Foreign materials (i.e. dust) and organic materials (i.e.
blood) should be removed before UV-C treatment is performed;
 In treatment room where germicidal ultraviolet rays are obstructed, it may be advisable to perform multiple treatments in each side
of fixed objects like, beds or tables (see figure 7);
 Remove all medications, dressings, bandages, liquids and food items from treatment area before disinfection;
 Make sure that no objects and/or materials made of polymers are within 60 cm from the unit. This Items may become hot and/or
damaged;
 WonderXCart is supplied with 3 meters power plug, after connecting the power plug in the sock the equipment will automatically
turn on;
 WonderXCart is supplied with UV-C dosimeters to verify dosage intensity across the disinfection room;

After setting the cycle to start, the unit will begin a 90 seconds countdown to evacuate the room. After that it will turn on the
germicidal UV-C lamps;
 360º motion sensors will detect movement, if anyone is in the disinfection room lamps will switch off. Press SET to resume in
keypad control or resume cycle using WonderX app.
Figure 6: standard hospital room multiple treatments.
Warning Signs positioning
11.2.
It is the operator's responsibility to post signs or notices for all personnel and persons in the building or facility so that they be
made aware that the disinfection room is off limits during treatment.
WonderXCart is supplied with one protective case with warning sign (figure 8).
Place the protective case directly in front of the closed room door, and verify if the warning sign is widely visible as a safety
precaution.
Figure 7: protective case with warning signs.
Failure to place warning signs – Exposure risk
11.2.1.
In case the safety warning is forgotten, misplaced or overlooked the WonderXCart 360º motion sensors will detect any intruder's
movement and will automatically shut down the equipment lamps within a 5 meters radius. However in case of UV-C light
exposure, to the eyes will cause a painful sensation roughly 4-12 hours after, due to the cornea and conjunctiva inflammation.
Depending on the intensity can cause
permanent damage in humans from exposure, regardless, great care should be taken to avoid UV-C ray's exposure.
Notice d'Utilisation
Bedienungsanleitung
keratoconjunctivitis
also known as welder's flash and snow-blindness. There is no evidence of
I0001-2021-MNS-MKT
2 . Under no circumstances should this
11 / 47