FINO FINOFRAME PMMA SPLINT Notice D'utilisation page 7

• To ensure traceability and assignment of the product data as well as
the LOT numbers for the patient at any time, it is recommended to
store the milling blank in the original packaging during two milling
operations.
• When disinfecting the construction, only alcohol-free disinfectants
should be used as crazing could otherwise form.
• Changes to the construction through use, e.g. due to fissures,
cracks, clouding or significant signs of abrasion, necessitate a
repair or refabrication. Monitoring should be carried out with
regular assessment of the denture at the follow-up presentation
in the dental surgery.
Warnings
Processing PMMA frameworks may generate dust which can lead to
mechanical irritation of the eyes and airways. Therefore, always ensure
that the extraction system on your milling machine and at the workplace
is working properly for individual post-processing and that you are using
personal protective equipment.
For detailed information please see the applicable Material Safety Data
Sheet, available upon request or as download from www.fino.com
Disposal
Residues from processing the
disposed of as residual waste.
The product properties are based on compliance with and
observation of these instructions for use.
Date of information 2019-10
FINOFRAME PMMA SPLINT
have to be