FINO FINOFRAME PMMA SPLINT Notice D'utilisation page 5

FINOFRAME PMMA SPLINT
Milling blank made of thermoelastic PMMA without
fillers and peroxide
en
Instructions for use, please read carefully!
Intended use
FINOFRAME PMMA SPLINT
•
splints, drilling templates, functional impression trays and impres-
sion trays, bite templates, bleaching trays and "lost moulds" for
casting in dental prosthetics.
Indication
• Abnormal jaw function
• Total or partial tooth loss
Contraindication
• Hypersensitivity to one of the components
Composition
• Polymethylmethacrylate (PMMA)
• Methylmethacrylate (MMA) may be contained as residual monomer
up to max. 1 %.
Physical data
Property
Glass transition
Flexural strength
Modulus of elasticit
Vickers hardness
Water uptake
Water solubility
is suitable for the fabrication of occlusal
Result
121 °C
156 ± 6 MPa
3000 ± 100 MPa
23.2 ± 0.3 HV 0.2
< 32 μg / mm³
< 1.6 μg / mm³
Test method
ISO 11357
EN ISO 10477
EN ISO 20795-1
EN ISO 6501
EN ISO 20795-1
EN ISO 20795-1