Install The Removable Pillows - Kohler K-1360 Mode D'emploi

Position the small pillows as
desired above the water line.

14. Install the Removable Pillows

CAUTION: Risk of product damage. Do not submerge the pillows underwater or use them as seat
cushions.
NOTE: For best attachment to the whirlpool surface, moisten the back surface of the pillows at the suction
cup locations.
Clean the whirlpool surface of any soap film or oils. Suction cups are located on the back side of the
pillows. Position the large pillow in the appropriate location on the whirlpool ledge, and press
down firmly at the suction cup locations with the heel of your hand. Position the small pillows as
desired above the waterline by again pressing down firmly with the heel of your hand. Check to
make sure that the pillows are attached firmly to the whirlpool.
Detach the pillows by lifting them off the whirlpool surface.
1022211-2-C
Position the large pillow on the
whirlpool ledge, and press down
firmly with your hand.
14 Kohler Co.