General Description; Summary; Extent Of The Delivery; Functional Description - Grizzly Tools BHS 2670 E2 Traduction De La Notice D'utilisation Originale

Taille-haies à essence
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 19
Store the hedge trimmer in a place
where fuel vapours cannot come into
contact with open flames or sparks. Al-
ways let the hedge trimmer cool down
before you put it into storage.
When transporting or storing the
hedge trimmer, the cutting unit must
always be covered with the protective
hood of the cutting unit.
In the case of an accident or mal-
function during operation, the de-
vice must be switched off immedi-
ately. Injuries must be properly treated
or medical assistance sought. Read
the "Troubleshooting" section to cor-
rect any malfunctions or contact our
Service Centre.

General description

The illustration how to handle the
appliance can be found on page
2+3.

Summary

1 Blade bar
2 Hand guard
3 Anti-vibration handle
4 Ignition cable
5 Spark plug (hidden)
6 Choke
7 Fuel pump (primer)
8 Starter handle with starter cord
9 Adjustable handle
10 Release lever for handle
adjustment
11 On/Off switch
12 Fuel tank
13 Filler cap
14 Air filter cover
15 Motor casing with ventilation
slots
16 Throttle
17 Throttle lock
18 Blade guard

Extent of the delivery

-
Petrol hedge trimmer
-
Hand guard
-
Anti-vibration handle
-
Blade guard
-
Spark plug wrench
-
Instruction Manual

Functional Description

The petrol hedge trimmer is driven by a
two-stroke engine.
A double-sided blade serves as the trim-
ming assembly. When trimming, the blade
moves in a linear reciprocating manner.
The hand guard protects your hands
against twigs and branches.
Read the sections below to learn more
about each operating element's function.

Safety equipment

2 Hand guard
prevents the hand from contacting the
blade.
11 On/Off switch
turns the motor on or off. Unlock it be-
fore trying to restart the motor.
17 Throttle lock
prevents accidental revving up of the
motor. You need to press the throttle
lock before the throttle will operate.

Intended use

The appliance is intended for cutting and
trimming hedges, bushes and ornamental
shrubs in residential areas. Branches up
to 27 mm thick are cut. Every other use
not explicitly permitted in this manual may
GB
79

Publicité

Table des Matières
loading

Table des Matières