General Description; Function Description; Technical Specifications - Grizzly Tools ERM 1846 GT Traduction De La Notice D'utilisation Originale

General Description

The illustration how to handle
the appliance can be found on
page 2-3.
Summary
1 Curved handle
2 Start lever
3 2 star knob nuts, 2 long screws,
2 washers to fit the curved han-
dle
4 Lower bar
5 Collision guard
6 2 star knob nuts, 2 short screws
to fit the lower bar
7 Grass catcher
8 Back wheels
9 Front wheels
10 Housing
11 Lateral impact protection (not
visible)
12 Cutting height adjuster
13 Carrying handle appliance
14 Carrying handle grass catcher
15 Cable holder
16 Level gauge
17 Mains cable
18 Equipment cable
19 Locking button (not visible)
20 Cable strain relief
21 Mulching kit (already mounted)
22 Locking button mulching kit
23 Side ejection channel
24 Attachment for grass catcher
25 Blade
26 Blade bolt

Function Description

The electric lawnmower has a cutting tool,
which turns parallel to the cutting level.
It features a powerful electrical drive, a
sturdy metal casing, a safety switch, a
collision guard as well as a grass catcher
with level gauge. Additionally, the equip-
ment is height adjustable to seven levels
and has smooth-running wheels.
The operator has the choice of three func-
tions: mowing with grass catchment bas-
ket, mulch-mowing or mowing with lateral
grass ejection.
For the function of the operating parts,
please refer to the descriptions below.

Technical Specifications

Electric Lawnmower
Mains voltage ............. 220-240 V~, 50 Hz
Motor input power
Protection class ..................................II
Protection type...................................IPX4
Idling speed (n) .........................3100 min
Cutting circle ....................................46 cm
Cut height ............................... 30 - 75 mm
Weight ...........................................24.1 kg
Lawn bag volume
Sound pressure level
(L ) .....................82.9 dB(A), K
pA
Sound power level
guaranteed .............................. 96 dB(A)
measured ........ 94.6 dB(A), K
Vibration (a ) .......... 1.89 m/s
h
This device is designed for operation on
a power supply network with a system
impedance Zmax at the transfer point
(domestic connection) of a maximum of
0.316 Ohms.
The user must ensure that the device is
operated only on a power supply network
that fulfils this requirement.
........ ERM 1846 GT
......................... 1800 W
................................60 l
= 3 dB
pA
(L )
WA
= 1.8 dB
WA
, K= 1.5 m/s
2
GB
-1
2
67