Grizzly Tools BHS 2670 E2 Traduction De La Notice D'utilisation Originale page 77

• Do not allow other persons touch the
appliance. Keep the appliance away
from humans - mainly from children -
and pets. Keep a safety clearance of
3 m in all directions. Suspend your
work when humans or pets are near-
by.
• The operator or user is liable for acci-
dents, injury to humans or damage to
their property.
• Make yourself familiar with your en-
vironment and take heed of possible
hazards you may not hear when work-
ing with the machine.
• Carefully inspect the are you are
about to trim and remove any wires or
other foreign matter.
• Wear suitable working clothes such as
solid boots with non-slip soles, sturdy
long trousers and gloves (e.g. chrome
leather gloves). Do not wear loose
clothing or jewellery, as it can become
jammed in the moving parts. Never
use the device barefooted or wearing
open sandals.
• Wear goggles and a head guard to
protect yourself against parts darting
off. Wear ear protection.
• Ensure a safe stand during operation,
especially on stairs or ladders. Avoid
abnormal postures. Always hold the
appliance with both hands. Be par-
ticularly careful when working down a
slope.
• Before turning on the appliance,
check that it will not touch any objects.
Turn the appliance off before putting it
down.
• Do not operate the appliance when
you are tired or not concentrating or
after consuming alcohol or tablets.
Have regular breaks. Proceed with a
clear mind.
• Longer periods of operation may lead
to the vibrations disturb blood circula-
tion through your hands. Wear suit-
able gloves and have regular breaks.
• Do not operate the appliance in the
rain, in bad weather, in damp environ-
ments or on wet hedges. Make sure
the light is good during operation.
The safety devices and your per-
sonal protection equipment protect
yourself and the health of others
and will ensure that the appliance
is working properly:
• Do not operate a damaged or incom-
plete appliance or a unit that has
been manipulated without the manu-
facturer's permission. Do not operate
the appliance if the safety devices are
defective. Before operating the appli-
ance, check that it is safe to use.
• Do not operate the appliance unless
all handles and safety devices are
mounted properly.
• Before operating the appliance, verify
that all parts of the trimming assembly,
e.g. the blade and the screws holding
it, are working properly and are neither
jammed nor damaged nor worn. Work
with a fully functional trimming assem-
bly only.
• Only use spares and accessories
delivered and recommended by the
manufacturer.
• Do not pick up the appliance by the
blade bar and do not use the protec-
tion device to hold it.
• Shut down the motor when
- not using the appliance, transporting
it or leaving it unattended,
- before inspection, servicing or work
on the hedge trimmer;
- before adjusting the working position
of the cutting unit;
- inspecting the appliance or remov-
ing jams,
GB
77