Focal OD 108-T Manuel D'utilisation page 3

Custom oD 108 - t
U s e r m a n u a l
CAUTION: the loudspeaker is originally set into 100V mode, on 30W position.
Please check that the switch at the back of the loudspeaker is correctly set according
to the type of your amplifier.
Low impedance use (8Ω)
CAUTION: before turning on the system, please check that your amplifier is set
into 8Ω mode.
High impedance use (70V/100V)
CAUTION: before turning on the system, please check that your amplifier is set
into 100V mode.
Input switch
1 - low impedance 8Ω mode
2 - not connected (security position)
3 - 70V/60W mode only
4 - 100V/60W mode or 70V/30W
5 - 100V/30W mode or 70V/15W
6 - 100V/15W mode or 70V/7.5W
3