left
side
panel
rear
panel
brace
bolt
(ee)
slot
Fig. 6
STEP 3: ASSEMBLiNG BRAcES AND REAR
PANEL
See Figures 6 - 7.
installing the rear panel:
Place bolts, M5 x 12 mm (EE), through the side of the
rear panel and into the side panel. Tighten securely.
Repeat for the other side.
installing the braces:
Secure two braces to the base and side panels using
M5 x 12 mm bolts (EE). Tighten securely.
Secure the remaining two braces to the side and rear
panels using M5 x 12 mm bolts (EE). Tighten securely.
installing the front panel:
From the front of the base, align the holes in the front
panel with the holes at the top of the side panels.
Secure the front panel to the side panels using four
bolts, M5 x 12 mm (EE).
ASSEMBLY
right side
panel
tab
tab
front
panel
Fig. 7
STEP 4: ATTAcHiNG iNSERT STORAGE TO
BASE
See Figure 8.
Place the insert storage inside the cabinet on the left
side. Align holes in the insert storage to holes in the
base.
Secure the insert storage to the base using four bolts,
M4 x 12 mm (AA).
bolt
(aa)
base
Fig. 8
10
bolt
(ee)
insert
storage