Epson PowerLite Home Cinema 710HD Installation Rapide page 2

3
Turn the zoom ring to enlarge or reduce the image.
4
Turn the focus ring to sharpen the image.
5
If your image looks like
to one side of the screen at an angle. Use the horizontal slider on the
projector to correct it. Or place the projector directly in front of the
center of the screen, facing the screen squarely.
6
Your projector automatically adjusts images that look like
but if necessary you can press the
correct it.
Using the remote control
Make sure the batteries are installed as shown (two AA batteries).
Turn projector on
and off
Access projector
menus
Turn off projector
display
For more information on using the remote control, see the online User's
Guide.
or , you've placed the projector off
or
or button on the projector to
Choose which
source to display
Navigate projector
menus
Get solutions to common
problems
Troubleshooting
If you see a blank screen or the No signal message after turning on your
video device or computer, check the following:
•
Make sure the power light on the projector is green and not flashing,
and the A/V Mute slide is open.
•
Press the Source Search button on the projector or the remote control
to switch to the correct image source, if necessary.
•
If you're using a Windows laptop, press the function key on your
keyboard that lets you display on an external monitor. It may be labeled
CRT/LCD or have an icon such as
Fn key while pressing it (such as Fn + F7). Wait a moment for the display
to appear.
•
If you're using a Mac laptop, open System Preferences and select
Displays. Select the VGA Display or Color LCD option if necessary,
then click the Arrange or Arrangement tab, and select the Mirror
Displays checkbox.
Where to get help
Manual
For more information about using the projector, click the icon on your desktop
to access the online User's Guide (requires an Internet connection). If you don't
have a User's Guide icon, you can install it from the CD or go to the Epson
website, as described below.
,
Telephone support services
To use the EPSON PrivateLine
®
the PIN on the EPSON PrivateLine Support card included with your projector.
This service is available for the duration of your warranty period. You may also
speak with a projector support specialist by dialing (562) 276-4394 (U.S.) or
(905) 709-3839 (Canada).
Support hours are 6
and 7 to 4 , Pacific Time, Saturday.
AM PM
Days and hours of support are subject to change without notice. Toll or long
distance charges may apply.
Internet support
Visit www.epson.com/support (U.S.) or www.epson.ca/support
(Canada) for solutions to common problems. You can download utilities and
documentation, get FAQs and troubleshooting advice, or e-mail Epson.
Registration
Register today to get product updates, special promotions and customer-only
offers. You can use the CD included with your projector, or register online at
www.epson.com/webreg.
EPSON and PowerLite are registered trademarks and EPSON Exceed Your Vision is a registered logomark of Seiko
Epson Corporation. PrivateLine is a registered trademark of Epson America, Inc. PrivateLine is a registered trademark of Epson America, Inc.
General Notice: Other product names used herein are for identification purposes only and may be trademarks of
their respective owners. Epson disclaims any and all rights in those marks.
This information is subject to change without notice.
© 2011 Epson America, Inc. 12/11
Printed in XXXXXX
. You may have to hold down the
Support service, call (800) 637-7661 and enter
®
to 8 , Pacific Time, Monday through Friday
AM PM
CPD-36139