Epson PowerLite Home Cinema 705HD Guide Rapide

PowerLite Home Cinema 705HD
®
Quick Setup
Before using the projector, make sure you read the safety instructions in the
User's Guide on your projector CD.
Connect the projector
Choose from the following connections:
Video Player
Connect up to 4 video devices and use the remote control to switch between
them.
S-Video RCA video cable
cable
Audio cable (composite video)
(optional) (optional)
Camera or USB Device
Connect a digital camera or other USB device to the projector's
(flat) USB port.
Thumb drive
Digital camera
You can use the projector's Slideshow feature to project JPEG images. See the
User's Guide on your projector CD.
*411761300*
*411761300*
Component HDMI video
video cable
(optional) (optional) (optional)
Component-
to-VGA
adapter
Turn on your equipment
1
Turn on your video source.
2
Plug in the projector.
3
Open the A/V Mute slide all the way.
cable
4
Press the
The power light flashes green, then stays on.
NOTE: To shut down the projector, press the
unplug it. You don't have to wait for the projector to cool down.
Adjust the image
1
If you don't see an image, press the Source Search button on the
projector or the remote control to select the image source.
2
Type A
To raise the image, press the foot release button and lift the front of the
projector. Release the button to lock the foot in position.
3
Turn the focus ring to sharpen the image.
To reduce or enlarge the image, turn the zoom ring.
4
If your image looks like
one side of the screen at an angle. Place it directly in front of the center
of the screen, facing the screen squarely.
5
If your image looks like
projector to correct it.
power button on the projector or remote control.
Power light
Power button
power button twice, then
or , you've placed the projector off to
or , press the
or
buttons on the