Publicité
Les langues disponibles
Les langues disponibles
CORRECT USE OF THE
PRODUCT
This appliance is intended for home use as a
steam cleaner as described and in accordance
with the instructions provided in this manual.
Please read these instructions carefully and
keep them, as you may find them useful in the
future.
POLTI
DECLINES
DAMAGE OR ACCIDENT DERIVED FROM
ANY USE OF THIS APPLIANCE WHICH IS
NOT
IN
CONFORMITY
INSTRUCTIONS
CONTAINED
BOOKLET.
IMPORTANT
Before leaving our factory all our products are
rigorously
tested.
VAPORETTO may contain some residual water
in the boiler from the testing.
SET UP
Before using VAPORETTO for the first time
assemble the pivoting wheels as indicated in the
Fig. A.
PREPARATION FOR USE
Steam may cause serious injury if in
contact with body parts. Always allow the
steamer to cool down before handling.
To reduce the risk of personal injury
unplug the power cord from the electrical
outlet and let the appliance and the
accessories
cool
down
handling
Always make sure that the appliance is
unplugged
maintenance work of any kind, including
adding water or cleaning the appliance.
VAPORETTO ECO CARE
LIABILITY
FOR
WITH
IN
THIS
For
this
reason,
completely
before
before
performing
1. Unscrew the patented safety cap (A) and fill
the boiler with about 50 fl oz (1.5 L) of water
using the filler funnel (14) making sure that it
does not overflow (fig. 1).
However, since water contains lime scale by na-
ture, which may cause scaling in the long run, we
recommend using a mixture of 50% tap water and
50% distilled water or bottled spring water. Never
use 100% distilled water or bottled spring water but
ANY
always mix them with 50% tap water. To use tap
water only and avoid scale formation, we recom-
THE
mend periodically adding the special natural scale
removal agent Kalstop FP2003. Pour half vial of
Kalstop into the boiler tank containing the rec-
ommended quantity of water. If your water sup-
ply is particularly hard, you may want to use
more (such as 1 vial for 34 fl oz / 1 liter of water).
2. Carefully screw on the safety cap to hand
tight (Fig. 2). Make sure the patented safety
your
cap (A) is fully and correctly screwed on,
otherwise steam may escape from around
the cap.
3. Connect the power supply cable (F) into an
electrical outlet of the correct voltage.
Do NOT under any circumstances put or leave
the filler funnel in the water filling aperture of the
appliance when the appliance is connected to
the electrical outlet. Danger of burns!
Always make sure generator on/off switch (B) is
switched OFF before connecting the appliance
to the mains.
INSTRUCTIONS FOR USE
1a. Press down the generator on/off switch (B)
and the accessories on/off switch (C) which
will light up.
2a. Open the cover of the central connector
block (D) and insert the central connector (4)
pressing the connector button (5) and taking
care that the locking tab (6) is correctly
positioned in the lock-in aperture (E) on the
block (Fig. 3).
3a. When the generator on/off switch (B) goes
out, the steam cleaner is ready for use
9
Ordinary tap water may be used.
Publicité
