CLEANING AND CARE
• For good product preservation, clean the mixer daily.
• Switch off the mixer and unplug it from the mains.
• Prepare the detergent and a cloth. Start at the top of your beverage mixer and
continue at the bottom. DO NOT allow water/disinfectant to penetrate the
ventilation slots on the rear side of the unit.
• Pay particular attention to cleaning the rod. It is a good idea to remove the residue
with a small brush.
• Dry the unit completely before the next use.
• The switch has three speeds, you can choose what you want. Please have a look at
the photo.
(I) = High speed / (II) = Low speed
EN
13