KTM TOP CASE 48L Guide D'information page 9

Detaching the case from the carrier plate:
- Set the key (included) to "Release".

- Push in the lock and the handle opens.
- Pull the locking cap forward.
- The case can now be separated from the carrier plate.
Mounting the back rest (optionally available):
- Drill 5-mm holes for M5 screws into the lower part of the Top
Case at the marked points.
- Mount range change metal nuts (scope of delivery of the
back rest) on the back rest.
- Position the back rest on the Top Case from the outside,
mount with screws and seal rings form the inside (scope of
delivery of the back rest) and tighten.
9