KTM TOP CASE 48L Guide D'information page 8

8
Universal mounting:
- Move the carrier plate (included) to the mounting position.

- Mount and tighten screws M6x35
and hex nuts (all included).
 
Mounting the SMT model:
- Move the carrier plate (included) to the mounting position.

- Mount and tighten screws M6x40
and hex nuts (all included).
 
Opening the case:
- Set the key (included) to "Open".

- Push in the lock and the handle opens.
- Pull the fl ap up and the case opens.
Closing the case:
- Close the case cover.
- Push the handle down until you hear the locking mechanism
snap into place.
- Set the key to "Close".
, bushings , washers
 
, bushings , washers
 