RESTRAINTS SHOULD NOT BE HELD
AWAY FROM BODY BY WHEELCHAIR
COMPONENTS SUCH AS ARMRESTS OR
WHEELS
2.5
Folding/Unfolding
CAUTION
Keep fingers away from moving parts of the wheelchair.
2.5.1 Unfolding the wheelchair
1. Position yourself behind the wheelchair.
2. Use the handgrips to open the wheelchair as much as possible.
3. Position yourself at the front of the wheelchair.
4. Push both seating tubes down till they are fixed in their position.
2.5.2 Folding the wheelchair
1.
Fold the footplates or remove the footrests (see § 3.1).
2. Take the seat on the front side and backside and pull it up.
2.5.3 Mounting the rear wheels
1. Take the rear wheel and push button (1).
2. Keep the button pushed in and mount the rear wheel axle until it
stops.
3. Release the button.
4. Check that the wheel is secured.
2.5.4 Taking off the wheels
1. Make sure the brakes standing in the off position.
2. Take the wheelchair to the side frame where you want to remove
the wheel.
3. Press the button (1) in the center of the wheel hub.
4. Pull the wheel away from the frame.
2.6
Storage
Make sure that your wheelchair is stored in a dry environment to prevent mould from
growing and the upholstery from being damaged, see also chapter 5.
Risk of injuries
7
PELVIC RESTRAINTS SHOULD MAKE FULL
CONTACT ACROSS THE FRONT OF THE BODY
NEAR THE JUNCTION OF THE THIGH AND
PELVIS
EN
V300DL
2022-05
Before use
NL
1