Operating The Flx 70; Telephoning With The Flx 70 - Sennheiser FLX 70 Notice D'emploi

Operating the FLX 70

Telephoning with the FLX 70

Accepting an incoming call
!
Make sure the headset is paired to your mobile phone (see "Pairing
the headset to mobile phones or other Bluetooth devices" on page
13).
When you receive a call, a ring tone is heard in the speaker and the
LED flashes blue quickly. To accept this call if the headset is already
switched on:
!
Press the hook button
volume buttons
A beep is heard in the speaker.
!
Start to talk.
To accept the call if the headset is not
switched on:
!
Press the hook button
3 sec.
The headset is switched on and the call is answered immediately
without any further action, however, there might be a delay de-
pending on the type of mobile phone you use.
!
Put the headset on your ear.
!
Start to talk.
or one of the
or .
for more than
17