Switching The Headset On/Off - Sennheiser FLX 70 Notice D'emploi

• The LED
flashes red.
• Three beeps are heard in the speaker 3 times with an interval of 15
seconds and thereafter with an interval of 2 minutes.
• Less than 10 minutes of talk time are left.

Switching the headset on/off

!
Press the hook button
up blue.
The headset is switched on and in one of
the following modes:
– If the headset is already paired to a mo-
bile phone, the headset is ready to use.
– If the headset is not yet paired to a mo-
bile phone, pair it as described under
"Pairing the headset to mobile phones or
other Bluetooth devices" on page 13.
– If the headset is already paired to a mobile phone and if there is
an incoming call on your mobile phone, the call is answered im-
mediately by pressing the hook button
To switch off the headset:
!
Press the hook button
flashes red and then turns off.
All settings are saved. The battery lasts longer, if you switch off the
headset when you are not using it.
12
for more than 3 sec. until the LED
for more than 3 sec. until the LED
once.
lights