Publicité
Les langues disponibles
Les langues disponibles
Peugeot 206 3+5 d.
2003 - ....
Ref. 1467
Fitting instructions
1)
Remove the spare wheel. Remove the rubbers out of the filling up rubbers and disassemble the heat
shield. Loosen the bumper at the bottom.
2)
On the inside of the chassis beam are fixing points for the tow bar provided, insert the cage nuts M10 in
those drillings. Place the mounting plates (1) and (2) with points (A) and (B) on the inserted cage nuts
and insert the bolts and washers, do not tighten.
3)
Make an incision in the underside of the bumper according to drawing. Place the tow bar with points (C)
and (D) between mounting plates (1) and (2), insert the bolts and screw everything firmly on (see
tension).
4)
Assemble the ball or the pedestal of the escamotable system together with the socket holder and the
security shackle, insert the bolts and screw everything firmly on (see tension).
5)
Re-assemble the heat shield and the filling up rubbers. Refasten the bumper at the bottom.
Composition
Tow bar reference 1467
1 ball T45K001
4 bolts M12x70 - DIN931
4 security nuts M12 - DIN985
2 mounting tubes T45
2 mounting pieces T45
1 security shackle (-s) (800053)
8 bolts M10x35 - DIN933
1 socket plate holder P04
8 security washers M10 - DIN128A
4 cage nuts M10 (CL4870-1-150)
2 washers ø20x10,5x2mm
2 nuts M10 - DIN934
1 mounting piece left (1)
1 mounting piece right (2)
Note
Please consult your cardealer or owners manual for the maximal permissable towing mass.
Remove any bitumen coating on the fastening position for the tow bar.
When drilling, be carefull not to damage any brake lines, electrical wiring or fuel lines.
(*)
(*-*')
(*-*')
(*')
(*-*')
(*')
(A-B-C-D)
(A-B)
(A-B)
(B)
(C)
All bolts and nuts : quality 8.8
Publicité
