Programming Functions Using The Group Parameter Display; Programming Group Coffee Water Temperature - Sanremo CAFE RACER CR2 Livret D'instructions

12.2 PROGRAMMING FUNCTIONS USING THE
GROUP PARAMETER DISPLAY
The following can be modified using the display
(3):
• Group coffee water temperature settings;
• Cup warmer temperature and ON/OFF
settings;
• Pre-brewing settings;
• Dose settings
IMPORTANT: The cup warmer
can only be programmed from
the left button panel.
Programming
To enter the settings menu, press button (B) on
the first group and button (D) together..
- To move onto the next function, press button (B)
- The functions can be customised separately
for each group by repeating on that group the
programming operations performed on the first
group on the left.
12.2.a PROGRAMMING GROUP COFFEE
WATER TEMPERATURE
The following screen is displayed:
- To vary the temperature, press buttons (A) and
(C) to reduce or increase respectively the set
value;
- Press button (B) to save the set value and
move onto the next function.
47
CAFÈ RACER
EN