Connections - Hestan Cue KRCR24 Mode D'emploi

LOCATION AND PREPARATION
CUT-OUT DIMENSIONS AND INSTALLATION METHODS - NON-FLUSH
If installing non-flush, the same side trim is used and the same cutout width is required.
EN
A

CONNECTIONS

ELECTRICAL AND WATER CONNECTION
Do not use extension cords and/or multiple adapters for the power supply connection.
Do not use extension cords or adapters.
The built-in Hestan filter cannot make any water safe to drink, it must be used with water that
is already suitable for human consumption.
Water supply alarm:
If the water supply must be turned off after the the appliance is fully installed, connected to
the water supply (if applicable) and operational, touch the On/Off switch
off first to avoid a 'NO WATER IN' alarm.
12
©2019 Hestan Commercial Corporation
36: 35-1/2" [900 ]
30: 29-5/8" [750]
24: 23-3/4" [600 ]
A
(CONT.)
A
A Lateral/side connection kit
1/4" [6.5]
3/8" [10]
to turn the unit