Mac allister MPWP2700 Mode D'emploi page 33

MPWP2700 by MacAllister
Power cord
If the supply cord is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualified persons in order to avoid a hazard
UK plug
If you need to replace the fitted plug, then follow the instructions belo .
IMPORTANT: The wires in the mains lead are coloured in accordance with the
following code:
Blue – Neutral Brown – Live
As the colours of the wire in the mains lead of this product may not correspond
with the coloured marking identifying the terminals in your plug, proceed as
follows. The wire, which is coloured blue, must be connected to the terminal,
which is marked with N or coloured black. The wire, which is coloured brown,
must be connected to the terminal, which is marked L or coloured red.
Outer sleeve
firmly clampe
WARNING! Never connect live or neutral wires to the earth terminal
of the plug, which is marked with E.
Only fit an approved 13 Amp BS 1363 or BS 1363/A plug and the
correctly rated fuse. If in doubt, consult a qualified electrician
If a moulded plug is fitted and has to be removed take great care
in disposing of the plug and severed cable, it must be destroyed to
prevent engaging into a socket.
MNL_MAC_GB_High pressure cleaner_MPWP2700_V5_200528.indd 33
Connect
Blue to
N(Neutral)
Care and maintenance
13 AMP fuse
approved to
BS 1362
Brown L(Live)
Cable grip
EN EN
33
5/28/20 8:31 AM