Soap Tank - Mac allister MPWP2700 Mode D'emploi

Before you start
EN
Accessories
WARNING! Avoid skin contact with detergents, in particular contact
with eyes! If detergent gets in your eyes, flush your eyes with clean
water and seek immediate medical attention!
10. Adjust the detergent flow with the knob (24c)

Soap tank

Some cleaning tasks can be completed with water alone, but for most tasks it is
advantageous to use a detergent. A detergent ensures a quick soaking of the dirt
allowing the high pressure water to penetrate and remove dirt more effectively.
1. Loosen the soap tank cap. Put proper detergent into the tank and then tighten
the cap afterwards.
2. Align and insert the tongues (15a) of the soap tank (15) with the grooves of
the spray gun (9) connection port (Fig. 14, step 1).
3. Securely fit the soap tank by turning it clockwise to lock it in place (step 2).
4. Turn the flow rate knob (15b) to adjust the detergent flow rate. During operation
the detergent mixes automatically with water and is released through the
detergent nozzle (15c).
NOTE: Only use mild, environmentally friendly detergents. Never
use aggressive chemicals, abrasive detergents or similar to avoid
damage to your health, the product and the environment.
WARNING! Avoid skin contact with detergents, in particular contact
with eyes! If detergent gets in your eyes, flush your eyes with clean
water and seek immediate medical attention!
20
MNL_MAC_GB_High pressure cleaner_MPWP2700_V5_200528.indd 20
9
1.
15a
15
15c
Fig. 14
MPWP2700 by MacAllister
15b
2.
5/28/20 8:31 AM