Mac allister MPWP2700 Mode D'emploi page 32

Care and maintenance
EN EN
Nozzle
Remove any dirt deposits from the
nozzle (18/20) hole using the cleaning
needle (25) (Fig. 24).
Water filter
1. Unscrew and remove the water inlet
hose adaptor (21) from the water
inlet (6).
2. Disassemble the water inlet hose
adaptor (21) (Fig. 25).
3. Rinse the water filter (21a) with clear
water.
Decalcification
From time to time – according to the nature of your tap water – calcium deposits
form in the product and accessories. The strength of the deposits (and thus the
frequency of decalcification) depends upon the degree of hardness of the water
and how often the product is used. Check with your supplier in order to find the
hardness of the water in your area.
Note: Use a mixture of water and citric acid or vinegar for
decalcification. These substances are readily biodegradable and
environmentally friendly!
1. Make a mixture of one part of proper vinegar and two parts hot water (≤ 50°C)
in a suitable container, e. g. in a bowl.
2. Lay the detachable accessories in the mixture.
3. Leave the accessories in the mixture for approximately 12 hours.
4. Rinse the accessories with clear water.
32
MNL_MAC_GB_High pressure cleaner_MPWP2700_V5_200528.indd 32
MPWP2700 by MacAllister
18
20
25
Fig. 24
21a
21
Fig. 25
5/28/20 8:31 AM