Dell Networking C1048P Guide De Mise En Route page 8

The base C1048P package is shipped with:
• C1048P chassis
• One rack-mount kit for rack installation, including two mounting brackets,
bolts, and cage nuts
• One set of self-adhesive rubber pads for a free-standing PE (four pads are
included)
• C1048P Getting Started Guide
• Safety and Regulatory Information
• Warranty and Support Information
• Software License Agreement
You can order additional items, such as optics, cables, and external power
supplies.
C1048P Front Panel
The ports on the front panel of the C1048P PE are shown in the following
illustration and described below.
Figure 1. C1048P Front Panel: Ports and Reset Button
1. Console port
The console port provides serial communication using the RS-232
protocol to connect a console terminal and access the C1048P
command-line interface (CLI). To set up a console connection, use the
serial cable (RJ-45 to DB-9 female connectors) shipped with the C9010.
The console port operates as an asynchronous link from 1200 to 115,200
6