Dell Networking C1048P Guide De Mise En Route page 21

4. Mount the C1048P into a 48.26 cm (19 inch) rack. Align the holes on
each bracket flange with the holes on a rack post.
5. Secure the C1048P to the rack using the rack bolts (provided with the
mount brackets) or cage nuts and cage-nut bolts with washers (provided
with the rack). Tighten the bolts on the bottom of each bracket flange
first; then tighten the bolts on top (item 1 in Figure 7).
CAUTION: Make sure that the rack bolts provided with the
mounting brackets fit the threaded holes in the rack.
Figure 7. Mounting the C1048P in a 2-Post Rack
Connecting to a C9010 Switch
The C1048P port extender has two 1/10G SFP+ ports on the front panel (see
Figure 2). The two SFP+ ports provide 10GbE uplinks to a C9010 switch with
SFP+ transceivers or 1G links to other devices with SFP transceivers using SFP
19