Publicité
Les langues disponibles
Les langues disponibles
Cord Management and Arm Tension Adjustment
CORD MANAGEMENT: Tighten cable
5
to top or bottom of wall mount
assembly arm (A) using cable ties (P).
• Do not remove screw or loosen screw until it is no longer engaged with the mount. Doing so may cause the
screen to fall.
ARM TENSION ADJUSTMENT: If more or less tension is desired in the arm pivot points, do the following:
• To increase tension, turn tension screw(s) clockwise with allen wrench.
• To reduce tension, turn tension screw(s) counter-clockwise with allen wrench. Do not turn more than half a turn.
WARNING
TENSION SCREWS
A
CORD
P
Publicité
