Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
SET UP XID ACCOUNT FOR VIA FIT
Creating an xID account will allow you to save and share workout data using the Via
Fit App. Up to four users can be saved on a machine. This process is the first step in
connecting your equipment. It must be done from a computer, tablet, or mobile device.
1) Visit the web site: www.ViaFitness.com
2) Once at the web site, select the CONNECT YOUR EQUIPMENT.
3) The first step in connecting your equipment will to be creating your xID account.
This will be your login to Via Fit.
4) Enter your phone number or another easy-to-remember 10-14 digit number. This
will be your account number.
5) Fill in your profile information to finish the xID account set up process. You will be
asked to provide an email address not associated with any other xID account. Check
your email after the set-up process for a link to validate your account.
CONNECT WIFI
Once you have created your xID account, you will be able to move on to activating the
WiFi on your equipment. Reminder, this requires you to use your computer, tablet, or
mobile device that is connected to your home WiFi network.
1) Press and hold
for 3-5 seconduntil the console beeps.
2) On your computer or other device, go to your WiFi settings. You should select the
network with your product model name. Doing this enables you to connect your
equipment to your wireless network.
3) A new window will pop up with the list of wireless networks your equipment can see.
Select your home WiFi network and connect.
4) The remaining step is to reconnect your computer or other device back to your WiFi
network. Go to your settings again and connect as you normally would.
Congratulations! You are now connected and ready to get started.
CONNECTIVITY
™
ENERGY SAVER (STANDBY MODE)
This machine has a special feature called Energy Saver mode. This mode is
automatically activated. When Energy Saver mode is activated, the display will
automatically enter standby mode (Energy Saver mode) after 15 minutes of
inactivity. This feature saves energy by disabling most power to the machine
until a key is pressed on the console. This feature can be turned on or off in the
engineering menu.
To enter the engineering menu, press and hold
to navigate to SWITCH FUNCTION and press
Use
Energy Saver mode, use
to select ENERGY SAVE ON or OFF. Press and
hold
for 3-5 seconds to exit SWITCH FUNCTION. Press and hold
3-5 seconds to exit the engineering menu.
OXFORD 6
and
for 3-5 seconds.
. Press
to select
again for
11
Publicité
Table des Matières
