Product Overview; Intended Use; Setup - Pattfield Ergo Tools PE-1506 Traduction De La Notice D'origine

1
2
3
4
5
6
7
8
B B
1
A A
C C
3
138 EN
14
13
12
11
10
9
2
4

Product overview

1x
1 Transport handle
2 Pressure gauge
3 Air outlet
4 Pressure regulator
5 Safety valve
6
Drain valve
7 On/Off switch
1x

Intended use

This compressor is intended for generating
compressed air to operate suitable pneumatic
tools, for blow cleaning, and for inflating. The
tool is only suitable for operation under su-
pervision. Only operate the compressor in dry
rooms at +5 °C ... +40 °C.
Any other use or modification to the tool is
considered as improper use and could cause 1x
considerable dangers.

Setup

CONNECTION
1 Switch off and unplug compressor.
DE A Fully rotate the pressure regulator Lieferumfang
counterclockwise.
FR B Wait, until the outlet pressure is at Etendue de livraison
0 bar.
IT C Insert the smaller coupling of the Materiale compreso nella fornitura
coiled air hose into the air outlet 3 until
NL the retaining sleeve pops out. Leveringsomvang
SV Leveransomfång
3 For inflating, screw the adaptor hose 11
CZ into the outlet of the inflation gun 12. Rozsah dodávky
SK Caution! When connecting air tools Rozsah dodávky
always follow their manufacturer's
recommended start-up procedure. RO Volumul livrat
GB Scope of delivery
1x
8 Power cord
9 Nozzles
10 Plastic nozzles
11 Adaptor hose
12 Inflation gun
13
Blow gun
14 Coiled air hose
1x
Restriction of use
DO NOT use the compressor:
- for gases other than air,
- in explosive atmospheres,
- for respiratory air (e.g. diving equipment),
- for medical use,
- for the food sector,
- for measuring, control and safety purposes, 1x
- for blow-cleaning clothes,
- for commercial, trade or industrial use.
2 Attach the blow gun 13, the inflation
gun 12, or an appropriate pneumatic
tool to the bigger coupling of the
coiled air hose 14 until the retaining
sleeve pops out.
4 Insert the appropriate nozzle into the
quick coupling of the adaptor hose.
Use the adaptor to connect one of
the plastic nozzles.
EN 139